|||
Galvanized Straight Duct - Fabrication
T-1
Galvanized
Galvanized Fittings - Fabrication
T-2
Galvanized
Galvanized Straight Duct - Field/Erection
T-3
Galvanized
Galvanized Fittings - Field/Erection
T-4
Galvanized
Galvanized 45° Tap, Rectangular on Round, Rectangular End Cap
T-5
Galvanized
Galvanized Straight Duct - Fabrication
T-6
Galvanized
Galvanized Fittings - Fabrication
T-7
Galvanized
Galvanized Straight Duct - Field/Erection
T-8
Galvanized
Galvanized Fittings - Field/Erection
T-9
Galvanized
Galvanized 45° Tap, Rectangular on Round, Rectangular End Cap
T-10
Galvanized
Galvanized Straight Duct - Fabrication
T-11
Galvanized
Galvanized Fittings - Fabrication
T-12
Galvanized
Galvanized Straight Duct - Field/Erection
T-13
Galvanized
Galvanized Fittings - Field/Erection
T-14
Galvanized
Galvanized 45° Tap
T-15
Galvanized
Ductboard Straight Duct - Fabrication
T-16
Duct Board
Ductboard Fittings - Fabrication
T-17
Duct Board
Ductboard Straight Duct - Field/Erection
T-18
Duct Board
Ductboard Fittings - Field/Erection
T-19
Duct Board
Ductboard 45° Tap, Rectangular End Cap
T-20
Duct Board
Black Iron Welded Straight Duct - Fabrication
T-21
Black Iron Welded
Black Iron Welded Fittings - Fabrication
T-22
Black Iron Welded
Black Iron Welded Straight Duct - Field/Erection
T-23
Black Iron Welded
Black Iron Welded Fittings - Field/Erection
T-24
Black Iron Welded
Black Iron Welded 45° Tap, Rectangular on Round, Rectangular End Cap
T-25
Black Iron Welded
Stainless Straight Duct - Fabrication
T-26
Stainless
Stainless Fittings - Fabrication
T-27
Stainless
Stainless Straight Duct - Field/Erection
T-28
Stainless
Stainless Fittings - Field/Erection
T-29
Stainless
Stainless 45° Tap, Rectangular on Round,Rectangular End Cap
T-30
Stainless
Plenums and Housings
T-31
Acoustical Ductliner - Straight (Fabricate and Patch Labor)
T-32
Fabrication Labor for Acoustical Ductliner - Fittings
T-33
Turning Vanes, Flexible Connectors, Sealer, Splitter, Dampers, Weld
T-34
Hangers
T-35
Transverse Connectors and their Reinforcing
T-36
Intermediate Reinforcing Duct Accessories
T-37
Air Distribution
T-38
Duct Accessories
T-39
Knocked Down Duct
T-40
Labor Rates for Round Pipe
T-41
Fabrication and Field Labor for Oval Pipe
T-42
Erection Labor Rates for Flexible Duct
T-43
Labor for High Pressure Round Fittings (Elbows)
T-44
Labor for High Pressure Round Fittings (Laterals)
T-45
Labor for High Pressure Round Fittings (Tees)
T-46
Labor for High Pressure Round Fittings (Reducers,Wyes)
T-47
Labor for High Pressure Round Fittings(Taps, Offset, Round to Square)
T-48
Labor for High Pressure Round Fittings(Crosses, Insulated End)
T-49
Labor for High Pressure Round Fittings(Lateral Body, Tee Body, Elbow)
T-50
Labor for High Pressure Round Fittings(Saddle Taps)
T-51
Labor for High Pressure Round Fittings(End Cap)
T-52
Labor for High Pressure Round Fittings(Elbows, Tees, Reducers)
T-53
Labor for Low Pressure Round Fittings(Laterals, End Caps, Spin Ins)
T-54
Labor for Double Wall Round Fittings(Elbows)
T-55
Labor for Double Wall Round Fittings(Laterals, Offset)
T-56
Labor for Double Wall Round Fittings(Tees)
T-57
Labor for Double Wall Round Fittings(Wye, Reducer, End Cap, Round to Square)
T-58
Labor for Double Wall Round Fittings(Taps)
T-59
Labor for Double Wall Round Fittings(Round to Oval, Bodies, Taps)
T-60
Labor for Double Wall Round Fittings
T-61
Labor for Oval Fittings(Elbows)
T-62
Labor for Oval Fittings
T-63
Labor for Oval Fittings(Saddle Taps, End Cap, Reducer)
T-64
Labor for Oval Fittings(Bell Mouth, Bodies, Elbow)
T-65
Labor for Oval Double Wall Fitting(Elbows, End Cap)
T-66
Labor for Oval Double Wall fittings(Eccentric Reducer, Taps)
T-67
Labor for Oval Double Wall Fittings(Lateral Body, Tee Body, Elbow)
T-68
Labor for Oval Double Wall Fittings(Taps, Reducer)
T-69
Low Pressure Galvanized Fittings - Fabrication
T-70
Galvanized
Low Pressure Galvanized Straight Duct-Field/Erection(.5" to 2" Water Column)
T-71
Galvanized
Low Pressure Galvanized Fittings - Field/Erection(.5" to 2" Water Column)
T-72
Galvanized
Low Pressure Galvanized 45° Tap, Rectangular on Round, Rectangular End Cap
T-73
Galvanized
Medium Pressure Galvanized Fittings - Fabrication(3" to 4" Water Column)
T-74
Galvanized
Medium Pressure Galvanized Straight Duct - Field/Erection(3" to 4" Water Column)
T-75
Galvanized
Medium Pressure Galvanized Fittings - Field/Erection(3" to 4" Water Column)
T-76
Galvanized
Medium Pressure Galvanized 45° Tap, Rectangular on Round, Rectangular End Cap (3" to 4" Water Column)
T-77
Galvanized
Galvanized Fittings - Fabrication(6" to 10" W.G. Pressure)
T-79
Galvanized
High Pressure Galvanized Straight Duct - Field/Erection(6" to 10" Water Column)
T-80
Galvanized
High Pressure Galvanized Fittings -Field/Erection(6" to 10" Water Column)
T-81
Galvanized
Galvanized 45° Tap, Rectangular on Round,Rectangular End Cap(6" to 10" Water Column)
T-82
Galvanized
Black Iron Welded Fittings - Fabrication
T-83
Black Iron Welded
Black Iron Welded Straight Duct - Field/Erect
T-84
Black Iron Welded
Black Iron Welded Fittings - Field/Erection
T-85
Black Iron Welded
Black Iron Welded 45° Tap, Rectangular on Round,Rectangular End Cap
T-86
Black Iron Welded
Stainless Fittings - Fabrication
T-87
Stainless
Stainless Straight Duct - Field/Erection
T-88
Stainless
Stainless Fittings - Field/Erection
T-89
Stainless
Stainless 45° Tap, Rectangular on Round,Rectangular End Cap
T-90
Stainless
Coordination, Handling, Removal Factors and Testing
T-91
Field Labor Rates for Vent Fittings
T-92
Erection Labor Rates for Gas Vent
T-92A
Labor for High Pressure Round Fittings (Elbows)
T-93
Labor for High Pressure Round Fittings (Laterals)
T-94
Labor for High Pressure Round Fittings (Tees)
T-95
Labor for High Pressure Round Fittings (Reducers,Wyes)
T-96
Labor for High Pressure Round Fittings (Taps, Offset, Round to Square)
T-97
Labor for High Pressure Round Fittings (Crosses, Insulated End)
T-98
Labor for High Pressure Round Fittings(Lateral Body, Tee Body, Elbow)
T-99
Labor for High Pressure Round Fittings
T-100
Labor for 10" W.G. Pressure Round Fittings(End Cap)
T-101
Labor for High Pressure Round Fittings (Elbows, Tees, Reducers)
T-102
Labor for Low Pressure Round Fittings (Laterals, End Caps, Spin Ins)
T-103
Labor for Double Wall Round Fittings (Elbows)
T-104
Labor for Double Wall Round Fittings (Laterals, Offset)
T-105
Labor for Double Wall Round Fittings (Tees)
T-106
Labor for Double Wall Round Fittings(Wye, Reducer, End Cap, Round to Square)
T-107
Labor for Double Wall Round Fittings (Taps)
T-108
Labor for Double Wall Round Fittings(Round to Oval, Bodies, Taps)
T-109
Labor for Double Wall Round Fittings(Eccentric Reducer, Elbow, Crosses)
T-110
Labor for Oval Fittings (Elbows)
T-111
Labor for Oval Fittings(Eccentric Reducer, Taps)
T-112
Labor for Oval Fittings(Saddle Taps, End Cap, Reducer)
T-113
Labor for Oval Fittings(Bell Mouth, Bodies, Elbow)
T-114
Labor for Oval Double Wall Fitting(Elbows, End Cap)
T-115
Labor for Oval Double Wall fittings(Eccentric Reducer, Taps)
T-116
Labor for Oval Double Wall Fittings(Lateral Body, Tee Body, Elbow)
T-117
Labor for Oval Double Wall Fittings(Taps, Reducer)
T-118
Labor for Round/Oval Connectors, Sealer and Reinforcing
T-119
Labor for Additional Round/Oval Connectors
T-120
Air Conditioner Units(Self Contained)
T-121
Air Handlers
T-122
Coils, hydronic
T-123
Condensing Units
T-124
Duct Heaters
T-125
Fan Coil Units
T-126
Fans-Centrifugal
T-127
Fans-Exhaust Ceiling Mounted
T-128
Fans-Exhaust Curb Mounted
T-129
Fans - In-line
T-130
Fans - Prop, Wall Mounted
T-131
Filters
T-132
Furnaces
T-133
Gravity, Relief, Intake Vents
T-134
Heat Pumps
T-135
Roof Top Units
T-136
Soundtraps
T-137
Terminal/VAV Units
T-138
Projects
Buildings
Project Cart
- No items in this cart.
Refine your results
Sort Results By